4-1
4. Troubleshooting
4. Troubleshooting
4-1. Troubleshooting
Before troubleshooting, setup the PC ‘s display as below.
• Resolution: 1280 x 1024
• H-frequency: 65 kHz
• V-frequency: 60 Hz
If no picture appears, make sure the power cord is correctly connected.
Check the following circuits.
• No raster appears: Function PBA, Main PBA, I/P PBA
• 5V develop but no screen: Main PBA
• 5V does not develop: I/P PBA
If you select Brightness adjust menu and push the “
(Enter/Source)” button for 5 seconds, the monitor automatically
returns to factory reset.
1.
2.
3.
4.
To Next Page
Loading...
