(The configuration at the back of the monitor may vary from product to product.)
1. DOWN :
Connect the
DOWN
port of the USB monitor and a USB
device with the USB cable.
2. UP :
Connect the
UP
port of the monitor and the USB port of the
computer with the USB cable.
z
To use DOWN, you have to connect the
UP to the PC.
z
Make sure to use the USB cable supplied with
this monitor to connect the monitor's UP port
and
our com
uter's USB
ort.
DVI IN
Connect the DVI-D (Dual link) Cable to the
DVI IN
port on the
back of your monitor.
z
By using DVI-D (Dual link), you can expect
twice faster speed and improved signal
quality than those of DVI-D (single link).
z
It is strongly recommended using DVI-D (Dual
link) Cable for the best quality and speed.
1. ON [ | ] / OFF [O]
Switch the monitor on and off.
2. POWER
Connect the power cord for your monitor to the
POWER
port
on the back of the monitor.
Kensington Lock
The Kensington lock is a device used to physically fix the
system when using it in a public place.
(The locking device has to be purchased separately.)
For using a locking device, contact where you
purchase it.
To Next Page
Loading...
