Connectin
the Monitor
1.
Connect the power cord for your monitor to the
POWER
port on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
2.
Using the DVI (Digital) connector on the video card.
Connect the DVI-D (Dual link) Cable to the
DVI IN
Port on the back of your Monitor.
[ DVI IN]
Turn on your computer and monitor. If your monitor displays an image, installation is
completed.
Connectin
USB
You can use a USB device such as a mouse, keyboard, Memory Stick, or external hard
disk drive by connecting them to the
DOWN
port of the monitor without connecting
them to the PC.
The USB port of the monitor supports High-Speed Certified USB
2.0.
High speed Full speed Low speed
To Next Page
Loading...
