Connecting the M onitor
Connecting the M onitor
1.Connect the power cord for your monitor to the power port on the
back of the monitor. Trun on power switch.
2.There are 3 ways to connect the signal cable to your monitor.
Choose one of the followings :
2-1. Using the D-sub (Analog) connector on the video card.
Connect the signal cable to the 15 pin D-sub Port on the back of
your monitor.
2-2. Using the DVI (Digital) connector on the video card.
Connect the DVI Cable(DVI-D + DVI-D) to the DVI Port on the
back of your Monitor.
Connecting to a Computer
2-3. Using the BNC (Analog) connector on the video card.
Connect the BNC Cable to the BNC/COMPONENT IN - R, G, B,
H, V port on the back of your Monitor and the 15 pin D-sub Port
on the computer.
3. Connect the audio cable for your monitor to the audio port on the
back of your computer.
4. Turn on both your computer and the monitor.
To Next Page
Loading...
