Samsung SyncMaster 320P - Folie 7

Introduction
Introduction
(Rear)
(Rear)
Viewing the Connection Panel
Rear
1. RS232C OUT/IN(RS232C Serial Port):
MDC(Multiple Device Control) Program Port
2. DVI IN(HDCP) (PC Video Connection Terminal)
: Using DVI Cable (DVI-D to DVI-D)
- DVI mode (Digital PC)
3. PC IN(RGB) (PC Video Connection Terminal)
: Using D-Sub Cable (15 pin D-Sub) - PC mode
(Analog PC)
4. PC/DVI/BNC AUDIO IN (PC/DVI/BNC Audio
Connection Terminal (Input))
BNC COMPONENT
5. COMPONENT AUDIO IN [L-AUDIO-R]
(Component Audio Connection Terminal (Input))
6. BNC/COMPONENT OUT
(BNC/Component Connection Terminal (Output))
- BNC (Analog PC) Connection :
connecting R, G, B, H, V port
- Component Connection : connecting PR, Y, Pb port
7. BNC/Component IN
(BNC/Component Connection Terminal (Input))