Direct Access Buttons
Most of the adjustments you make to your monitor will be accessed through the on-screen
menu described in the next section. The Contrast and Brightness features can also be
accessed with the touch of a button on the front of your monitor.
1
With the menu off, press the or button on the front of your monitor. The
button accesses the Brightness feature. The button accesses the Contrast feature.
2
Push the button to increase or the button to decrease the value of a selection.
3
Press the menu button twice to exit the on-screen menu.
3
2
1
3
4
1
Menu button
Opens and closes the on-scre e m e n u .
Also used to move between menus
when using the on-screen menu system.
2
The –/+ buttons
These buttons allow you to select and
adjust items using the on-screemenu.
When adjusting an item using the
o n - s c reen menu, the (
_
) button lowers
the value of the selected function.
The ( + ) button raises the value of the
selected function. These buttons are also
d i r ect access buttons for the Contrast
and Brightness feature controls. (See
the section on Direct Access Buttons).
3
The button
This button is used with the on-screen
menu system to select a highlighted
function for adjustment. Also used to
move between menus when using the
on-screen menu system.
4
Power button
Turns the monitor on and off.
The power indicator light glows green
during normal operation.
Front Panel
510/710-E 7/21/98 3:23 PM Page 3
To Next Page
Loading...
