• Custom
Although the values are carefully chosen by our engineers, the pre-configured values may not be
comfortable to your eyes depending on your taste.
If this is the case, adjust the Brightness and Contrast by using the OSD menu.
MENU →
→ → , → → MENU,EXIT
Contrast / Brightness / Sharpness (Not available in MagicBright mode of Dy-
namic Contrast.)
You can use the on-screen menus to change the contrast and brightness according to personal prefer-
ence.
• Contrast : Adjust the Contrast.
• Brightness : Adjust the Brightness.
• Sharpness : Adjust the Sharpness.
MENU →
→ , → → , , , → → MENU,EXIT
Auto Adjustment
The values of Fine, Coarse, Position are adjusted automatically.
By changing the resolution in the control panel, auto function is performed.
The direct button on the remote control is the 'AUTO' button.
Adjusting the Monitor
To Next Page
Loading...
