75
Setup and Reset
7
7 Setup and Reset
7.1.2 Wireless Connection
You can view the status of the Wireless USB connection between the product and a PC.
Selecting the Wireless Connection option. The input source will change to Wireless USB mode.
z The connection status will be shown even when the input source is not Wireless USB mode.
z Selecting Wireless Connection when a Wireless USB connection is established will automatically
change the input source to Wireless USB mode.
Activating Wireless Connection
1 Press [ ] on the product.
2 Press [ ] to move to SETUP&RESET and press [ ] on the product.
3 Press [ ] to move to HUB and press [ ] on the product. A message will appear indicating
that a Wireless USB connection is established or disconnected.
4 If a Wireless USB connection is established, press [ ] to move to Wireless Connection and press
[ ]. The input source will automatically switch to Wireless USB mode.
To Next Page
Loading...
