78
Setup and Reset
7
7 Setup and Reset
7.1.5 HDMI
You can view the HDMI connection status between the product and an AV device.
z The connection status will be shown even when the input source is not HDMI mode.
z Selecting the HDMI option when an HDMI cable is connected will automatically change the input
source to HDMI mode.
Configuring HDMI
1 Press [ ] on the product.
2 Press [ ] to move to SETUP&RESET and press [ ] on the product.
3 Press [ ] to move to HUB and press [ ] on the product. A message will appear indicating
that an HDMI cable is connected or disconnected.
4 If an HDMI cable is connected, press [ ] to move to HDMI and press [ ]. The input source
will automatically switch to HDMI mode.
To Next Page
Loading...
