85
Setup and Reset
7
7 Setup and Reset
7.2.3 Eco Saving
The Eco Saving function reduces power consumption by controlling the electric current used by the
monitor panel.
z This menu is not available when Bright is in Dynamic Contrast mode.
z This menu is not available when Eco Light Sensor is set.
Configuring Eco Saving
1 Press [ ] on the product.
2 Press [ ] to move to SETUP&RESET and press [ ] on the product.
3 Press [ ] to move to ECO and press [ ] on the product.
4 Press [ ] to move to Eco Saving and press [ ] on the product. The following screen will
appear.
z 75% : Change the monitor power consumption to 75% of the default level.
z 50% : Change the monitor power consumption to 50% of the default level.
z Off: Deactivate the Eco Saving function.
5 Press [ ] to move to the option you want and press the [ ].
6 The selected option will be applied.
To Next Page
Loading...
