EasyManua.ls Logo

Samsung SyncMaster NC190 - Page 42

Samsung SyncMaster NC190
71 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4-1 Installing the Software
If the <PCoIP Device Name> allows the administrator to give the Host or Portal a logical name. The default is pcoip-host-
MAC or pcoip-portal-MAC where MAC is the Host or Portal’s MAC address.
<PCoIP Device Description>
The <PCoIP Device Description> allows the administrator to give the Host or Portal a description or more information, e.g.
location of endpoint, etc.
The <PCoIP Device Description> is not used by the PCoIP Firmware and is provided strictly for administrator use.
<Generic Tag>
The <Generic Tag> allows the administrator to give the Host or Portal a generic tag information.
The <Generic Tag> is not used by the PCoIP Firmware and is provided strictly for administrator use.
<Connection Management> Tab
The <Connection Management> tab allows enabling or disabling connection management, and to specify the IP address of
the connection manager.
In a managed connection, an external <Connection Managerment> Server communicates with and can remotely control and
configure the device. Additionally, the connection manager can locate an appropriate peer for the device to connect to and
initiate the connection. <Connection management> can greatly simplify the administration effort for a large, complex system.
The Connection Management parameters can also be configured using the Webpage Administration Interface.
Figure : <Connection Management> Configuration
<Enable Connection Management>
If the <Enable Connection Management> option is enabled, the device can be configured and controlled by an external
connection manager.
<Identify Connection Manager By>
The <Identify Connection Manager By> selector allows the administrator to choose whether the connection manager is
identified by <IP address> or by Fully Qualified Domain Name (FQDN). If connection management is disabled, this field is
not required and is not editable.
Table 2-1 shows the configuration parameters available when either method is chosen. If an invalid IP address or DNS
name is entered, the OSD will prompt the administrator to correct it.
Table 2-1: Connection Manager Method
<Enable Event Log Notification>
The <Enable Event Log Notification> field controls whether the PCoIP Host and Portal devices send the contents of their
event logs to the connection management server.
METHOD DATA FIELDS
<IP address> Connection Manager IP Address
<FQDN> Connection Manager DNS name
2-6

Other manuals for Samsung SyncMaster NC190

Related product manuals