3. Disassembly and Reassembly
This section of the service manual describes the disassembly and reassembly procedures for the Monitor.
WARNING
As this monitor has parts that are sensitive to static electricity, be careful when handling them.
3-1. Disassembly and Reassembly
CAUTION
Turn the monitor off before beginning the disassembly process.1.
When disassembling the monitor, do not use any metal tools except for the provided jig.2.
Disassemble the monitor carefully as directed in the following procedures.3.
Description Picture Description Screws
1
Place monitor face down on cushioned
table.
2
Remove 4 screws from the stand.
6003-
001782
PB
3. Disassembly and Reassemble
3-1
3. Disassembly and Reassemble
To Next Page
Loading...
