4-4-2. How to Upgade SW and Micom
Insert a USB drive containing the rmware upgrade downloaded from samsung.com into the TV.
Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied. The TV will
turn off and turn on automatically after completing the rmware upgrade. Please check the rmware version after the
upgrades are complete (the new version will have a higher number than the older version). When software is upgraded,
video and audio settings you have When software is upgraded, video and audio settings you have you write down your
settings so that you can easily reset them after the upgrade.
Main SW upgrade
Store the sw program named "T-NTFMUMAC" in USB memory stick.1.
Connect the USB.2.
Click the MENU key in remote controler.3.
Select "4. Support" menu.
Locate the menu cursor "5. Software Upgrade" menu.
Click the ENTER key.6.
You can upgrade by USB.7.
4-48
4. Troubleshooting
4-49
4. Troubleshooting
4-48
4. Troubleshooting
4-49
4. Troubleshooting
To Next Page
Loading...
