Connecting the Power Cord and the Aerial or Cable Connection
or
Aerial Cable
VHF/UHF Aerial
Cable
✎
Plug the power cord into a wall outlet only after you have made all other connections.
✎
If you are connecting your product to a cable or satellite box using HDMI, Component, or Composite connections,
you do not need to connect the ANT IN jack to an aerial or a cable connection.
✎
Use caution when you move or swivel the product if the aerial cable is tightly connected. You could break the
aerial jack off the product.
Connecting the Power
✎
The picture may vary depending on the model.
Power Input
Setup
The initial setup dialog appears when the TV is first activated.
Follow the on-screen instructions to finish the initial setup process, including menu language choice, country choice,
channel source choice, channel scan, and more.
At each step, either make a choice or skip the step.
Users can manually perform this process at a later time under the System > Setup menu.
✎
The default PIN code is: 0-0-0-0.
English - 18
To Next Page
Loading...
