Memorizing Channels
Aerial
MENU → Broadcasting → Aerial
✎
Before your television can begin memorising the available channels, you must specify the type of signal source
that is connected to the TV.
Auto Tuning
(depending on the country)
MENU → Broadcasting → Auto Tuning → ENTERE
✎
Automatically allocated programme numbers may not correspond to actual or desired programme numbers. If a
channel is locked, the PIN input window appears.
• Auto Tuning
Aerial (Air/Cable/Satellite (for TD310 ES model)): Select the aerial source to memorise.
✎
When selecting Air, scans for a channel automatically and stores in the TV.
Channel Type (Digital & Analogue / Digital / Analogue): Select the channel source to memorise.
Channel Ordering (depending on the model): Select the channel order type.
When selecting Cable → Digital & Analogue, Digital or Analogue
– Operator Selection (depending on the country): Selects a provider of cable services.
– Search Mode: Scans for all channels with active broadcast stations and stores them in the TV.
✎
If you select Quick, you can set up the Network, Network ID, Frequency, Modulation and Symbol Rate
manually by pressing the button on the remote control.
– Network: Selects the Network ID setting mode among Auto or Manual.
• Network ID: When Network is Manual, you can set up Network ID using the numeric buttons.
• Frequency: Displays the frequency for the channel (differs in each country).
• Modulation: Displays available modulation values.
• Symbol Rate: Displays available symbol rates.
English - 40
To Next Page
Loading...
