Display Modes (D-Sub and HDMI/DVI Input)
The optimal PC display resolution for this product is 1366 x 768 @ 60 Hz. We very strongly recommend you set the
video output of your computer to the optimal resolution. You can also select one of the standard resolutions listed in the
table below and the product will be automatically adjust to the resolution you choose. If you set your computer’s video
output to a resolution not listed in the table, the product screen may go blank and only the power indicator will turn on.
To resolve this issue, adjust the resolution according to the following table, referring to the user guide for the graphics
card.
• Optimal resolution: 1366 x 768 pixels
Display Mode
Horizontal
Frequency (KHz)
Vertical
Frequency (Hz)
Pixel Clock
(MHz)
Sync Polarity
(H / V)
Mode Resolution
IBM 720 x 400 70Hz 31.469 70.087 28.322 -/+
VESA DMT 640 x 480 60Hz 31.469 59.940 25.175 -/-
MAC 640 x 480 67Hz 35.000 66.667 30.240 -/-
VESA DMT 640 x 480 72Hz 37.861 72.809 31.500 -/-
VESA DMT 640 x 480 75Hz 37.500 75.000 31.500 -/-
VESA DMT 800 x 600 60Hz 37.879 60.317 40.000 +/+
VESA DMT 800 x 600 72Hz 48.077 72.188 50.000 +/+
VESA DMT 800 x 600 75Hz 46.875 75.000 49.500 +/+
MAC 832 x 624 75Hz 49.726 74.551 57.284 -/-
VESA DMT 1024 x 768 60Hz 48.363 60.004 65.000 -/-
VESA DMT 1024 x 768 70Hz 56.476 70.069 75.000 -/-
VESA DMT 1024 x 768 75Hz 60.023 75.029 78.750 +/+
VESA DMT 1280 x 720 60Hz 45.000 60.000 74.250 +/+
VESA DMT 1366 x 768 60Hz 47.712 59.790 85.500 +/+
✎
For an HDMI to DVI cable connection, you must use the HDMI IN 2 (DVI) jack.
✎
The interlace mode is not supported.
✎
The set may operate abnormally if you select a non-standard video format.
✎
Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
✎
DPM(Display Power Management) Function does not work if you used in connection with the HDMI port of this
product.
✎
If an HDMI to DVI cable is connected to the HDMI IN 2 (DVI) port, the audio does not work.
English - 26
To Next Page
Loading...
