Manual Tuning
Menu → Broadcasting → Channel Settings → Manual Tuning
Scans for a channel manually and stores in the TV.
✎
If a channel is locked using the Channel Lock function, the PIN input window appears.
✎
This function may not be supported depending on the region.
• Digital Channel Tuning
Scans for a digital channel.
1. Select the New.
✎
When selecting Aerial → Air
Channel, Frequency, Bandwidth
✎
When selecting Aerial → Cable
Frequency, Modulation, Symbol Rate
2. Select the Search. When scanning has finished, a channel is updated in the channel list.
• Analogue Channel Tuning
Scans for a analogue channel.
1. Select the New.
2. Set the Programme, Colour System, Sound System, Channel and Search.
3. Select the Store. When scanning has finished, a channel is updated in the channel list.
Channel mode
• P (programme mode)
When tuning is complete, the broadcasting stations in your area have been assigned to position numbers from
P0 to P99. You can select a channel by entering the position number in this mode.
• C (aerial channel mode) / S (cable channel mode)
These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting
station or cable channel.
English - 40
To Next Page
Loading...
