Teletext Language
Menu → Broadcasting → Teletext Language
Set a desired language for teletext.
✎
English is the default in cases where the selected language is unavailable in the broadcast.
Common Interface
Menu → Broadcasting → Common Interface
• CI Menu: This enables the user to select from the CAM-provided menu. Select the CI Menu based on the menu PC
Card.
• CAM video transcoding: You can configure the setting to transcode the video codec from the CAM automatically.
Turn it Off if you do not want to use it.
✎
You must use a CAM that supports transcoding the video codec.
• Application Info: View information on the CAM inserted into the CI slot and on the “CI or CI+ CARD” which is
inserted into the CAM. You can install the CAM anytime whether the product is on or off.
1. Purchase a CI CAM module at your nearest dealer or by phone.
2. Firmly insert the “CI or CI+ CARD” into the CAM in the direction of the arrow.
3. Insert the CAM with the “CI or CI+ CARD” into the common interface slot, in the direction of the arrow so that it
aligns parallel with the slot.
4. Check if you can see a picture on a scrambled signal channel.
To Next Page
Loading...
