Tools 67
Note:
When pairing with another Bluetooth phone, enter whatever Passkey you wish. You must,
however, enter the same Passkey into the other phone when prompted.
You are prompted to verify that you want to connect with the device.
7. To connect with the device, press the
Yes
soft key.
To bypass connecting with the device, press the
No
soft key.
Connecting to a Registered Bluetooth Device
1. Power on the registered device and/or move to within 30 feet of it. Your phone
should automatically reconnect with the device or prompt you to accept such
a connection.
2. If the registered device does not connect automatically from the Registered
List, select the desired device.
Note:
If you are unable to connect with the device a pop-up appears in the display. To retry, press
the Yes soft key.
Bluetooth Settings
1. In standby mode, press Menu ➔ Tools ➔ Bluetooth ➔ Bluetooth Settings
to see the following options: Enable/Disable, Discovery Mode, Device Name,
Supported Profiles and Device Info.
2. Select the desired option to perform the related process.
Voice SVC
For information about Voice SVC, see “Voice Service” on page 30.
To Next Page
Loading...
Need help?
General
