Tools 73
Stop Watch
You can use this menu to set a stop watch.
1. In standby mode, press Menu ➔ Tools ➔ Stop Watch.
2. Press to start, stop, and resume the stopwatch count.
3. Press the Record soft key at the start of each succeeding event/lap to record
the completion time for the previous event/lap.
4. Press the Reset soft key to erase all stop watch (lap) times recorded.
Converter
To convert a Currency, Length, Weight, Volume, Area, or Temperature, do the
following:
1. In standby mode, press Menu ➔ Tools ➔ Converter.
2. Select the conversion feature you wish to use. The selected conversion
feature screen appears in the display with the
From
unit field highlighted.
3. Use the Left and Right navigation keys to select the unit to be converted
From.
4. Highlight the
From
quantity field.
5. Use the keypad to enter the quantity you want converted in the From quantity
field.
6. Highlight the
To
unit field.
7. Use the Left and Right navigation keys to select the units to be converted
From and To. The converted quantity appears in the To quantity field.
Note:
To include a decimal point, press .
To Next Page
Loading...
