OPERATION
28
Labeling the Channels
Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”,
“ESPN”, “PBS2”, CNN1”, etc.) A label consists of four fields, where each field is a letter,
a number, “*”, or a blank. When the INFO button is pressed, the channel label will
appear next to the channel number.
1
Press the CH or CH
button to tune to the
channel that will be labeled.
2
Press the MENU button to
display the menu.
Press the ▲ or ▼ button
to select “Channel”, then
press the ENTER button.
3
Press the ▲ or ▼ button to
select “Name”.
Press the ENTER button to
begin labeling. The left-most
field will be highlight.
(Each label has four fields.
See top paragraph.)
4
Press the ▲ or ▼ button
to select a letter, a number,
“*” or a blank.
(Pressing ▲ or ▼ button
results in this sequence:
A, B,...Z, *, blank, 0,1, ...9).
▼
Note: You cannot select “Name”
in the AV mode.
5
Press the
√√
button to
switch to the next field,
which will be highlight.
Select a second letter or
digit using the ▲ or ▼
button, as above.
Repeat the process to select
the last two digits.
Press the EXIT button to
exit.
Air 11
Move Enter Return
Channel
Auto Program
√√
Add/Delete : Deleted
√√
Air/CATV : Air
Name :
----
Move Adjust Return
Channel
Move Adjust Return
Channel
Move Enter Return
Channel
Auto Program
√√
Add/Delete : Deleted
√√
Air/CATV : Air
Name :
----
Auto Program
√√
Add/Delete : Deleted
√√
Air/CATV : Air
Name :
P
---
Auto Program
√√
Add/Delete : Deleted
√√
Air/CATV : Air
Name :
PBS2
To Next Page