81
Setup and Reset
6
6 Setup and Reset
Off: Disable FreeSync.
Standard Engine: Enable the basic FreeSync functions of the AMD graphics card.
Ultimate Engine: Enable the FreeSync feature with a higher screen frame rate. Screen tearing
(abnormal sync between the screen and content) is reduced in this mode. Note that screen
flickering may occur during game play.
If the FreeSync function is enabled, the screen may flicker when you play games.
4 Press [ ] to move to the option you want and press [ ].
5 The selected option will be applied.
FreeSync technology is solution that eliminates screen tearing without all the usual lag and latency.
FreeSync can be operated when you use AMD's graphic card with supporting FreeSync solution.
FreeSync is only supported by AMD graphics cards.
Select FreeSync Off if you are using a graphics card from a different manufacturer.
Please refer to the AMD's official website related situation.
Only a few of the following types of AMD graphics card can support FreeSync, and need to install the
AMD's latest official FreeSync driver.
Radeon R9 290X/290
Radeon R9 285
Radeon R7 260X/260
AMD A10 “Kaveri” APU (ex. A10 7850K)
For additional AMD graphics card models that support the FreeSync feature, visit the official AMD
website.
If the FreeSync function is enabled, the response rate during the game may fluctuate depending
on the resolution.
A higher resolution generally decreases the response rate.
If the FreeSync function is enabled, the screen can flicker depending on the game option settings.
Decreasing the game setting values might help to remove the flicker. Installing the latest drivers
from the AMD website may also fix this issue.
U24E850R / U32E850R
To Next Page
Loading...
