88
Setup and Reset
6
6 Setup and Reset
6.4 USB Super Charging
Charge the battery of a connected source device quickly using the USB 3.0 port on the product.
Setting USB Super Charging to On during a data transfer will stop the data transfer. If you set
USB Super Charging to Off, the standard charging and data transfer feature will be available.
High-speed charging is possible using the [ ] and [ ] ports only. These ports charge
devices faster than typical USB ports. The speed depends on the connected devices.
6.4.1 Configuring USB Super Charging
1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to
display the corresponding menu screen.
2 Press [ ] to move to System and press [ ] on the product.
3 Press [ ] to move to USB Super Charging and press [ ] on the product.
4 Press [ ] to move to USB1 or USB2 and press [ ] on the product.
The following screen will appear.
Off: Disable USB Super Charging.
On: Enable the function to quickly charge a source device connected to the USB 3.0 port.
5 Press [ ] to move to the option you want and press [ ].
6 The selected option will be applied.
To Next Page
Loading...
