Using the Channel Settings
Broadcasting > Channel Settings
Area
Broadcasting > Channel Settings > Area
Select your country so that the TV can correctly auto-tune the broadcasting channels.
"
Availability depends on the specific model and area.
Manual Tuning
Broadcasting > Channel Settings > Manual Tuning
Scans for a channel manually and stores in the TV.
If a channel is locked using the Channel Lock function, the PIN input window appears.
"
Availability depends on the specific model and area.
1.
Select the New.
2.
Set the Programme, Colour System, Sound System, Channel and Search.
3.
Select the Store. When scanning has finished, a channel is updated in the channel list.
Channel mode
●
P (programme mode)
When tuning is complete, the broadcasting stations in your area have been assigned to position
numbers from P0 to P99. You can select a channel by entering the positio n number in this mode.
●
C (aerial channel mode) / S (cable channel mode)
These two modes allow you to select a channel by entering the assigned number for each aerial
broadcasting station or cable channel.
Fine-Tuning the Screen
Broadcasting > Channel Settings > Fine Tune
Try Now
"
Available for analogue broadcasts only.
Analogue pictures can become shaky and full of noise. If this happens, you can fine-tune the signal
and/or reduce noise to clear up the picture.
1.
Select Channel Settings > Fine Tune. An adjustment bar appears on the screen.
2.
Make adjustments using the Samsung Smart Control until the picture clears up and then select
Save or Close. Select Reset to reset the Fine-Tune operation.
To Next Page
Loading...
Need help?
General