Pairing Samsung Smart Control
To control the TV with Samsung Smart Control, you need to pair Samsung Smart Control to the TV via
Bluetooth. Pair Samsung Smart Control to the TV.
"
Samsung Smart Control can only be paired to a single TV.
Point Samsung Smart Control at the remote control sensor of the TV and press the TV button to turn
the TV on.
"
Remote control receiver’s location may vary depending on the model.
Reconnecting Samsung Smart Control
If the Samsung Smart Control stops operating or works abnormally, replace the batteries as this may
be due to insufficient battery power.
If the problem persists, the Samsung Smart Control restore pairing with the TV.
1.
Press both the RETURN button and the MENU button simultaneously for more than 3 seconds.
"
You have to control Samsung Smart Control apart from TV within 30cm ~ 40cm. But, you must place
Samsung Smart Control toward to TV's remote control receiver.
2.
Connection image is appeared on the screen. And then, Samsung Smart Control is connecting to
TV automatically.
To Next Page
Loading...
Need help?
General