How to program cable box remote for Samsung UE19D4003BW LED TV?
To control your Samsung LED TV with a cable/set-top box remote, program the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set user manual for the SAMSUNG TV code.
What does 'Mode Not Supported' mean on Samsung UE19D4003BW?
If a 'Mode Not Supported' message appears on your Samsung LED TV, check the supported resolution of the TV and adjust the external device’s output resolution accordingly.
How to fix a tilted Samsung UE19D4003BW LED TV?
If your Samsung LED TV is tilted to the right or left side, remove the stand base from the TV and reassemble it.
What to do if there are difficulties assembling the stand base of Samsung UE19D4003BW LED TV?
If you are having difficulties assembling the stand base of your Samsung LED TV, make sure the TV is placed on a flat surface. If you cannot remove the screws from the TV, please use a magnetized screw driver.
Why does my new Samsung UE19D4003BW smell like plastic?
The plastic smell from your new Samsung LED TV is normal and will dissipate over time.
Why is TV Signal Information unavailable on my Samsung LED TV?
The TV Signal Information in the Self Diagnosis Test menu is only available with digital channels from an Antenna / RF / Coax connection on your Samsung LED TV.
General| Display diagonal | 19 \ |
|---|---|
| Display resolution | 1366 x 768 pixels |
| Native refresh rate | 60 Hz |
| LED backlighting type | Edge-LED |
| Supported graphics resolutions | 1366 x 768 |
| 3D | No |
| Product color | Black |
| Tuner type | Digital |
| Analog signal format system | - |
| Digital signal format system | DVB-C, DVB-T |
| Audio system | Dolby Digital Plus, Dolby Pulse |
| RMS rated power | 6 W |
| Number of speakers | 2 |
| USB 2.0 ports quantity | 1 |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 0 |
| Number of OSD languages | 29 |
| Smart modes | Game, Standard |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 35 W |
| Power consumption (standby) | 0.3 W |
| Power consumption (PowerSave) | 15 W |
| Package weight | 4100 g |
Weight and Dimensions| Depth (with stand) | 124 mm |
|---|---|
| Height (with stand) | 213.4 mm |
| Weight (with stand) | 2900 g |
| Depth (without stand) | 39.9 mm |
| Width (without stand) | 447.2 mm |
| Height (without stand) | 277.8 mm |
| Weight (without stand) | 2800 g |
Automatically scans and stores available channels based on signal source.
Allows manual scanning and storage of channels for specific frequencies.
Addresses issues like poor picture, distortion, and brightness.
Solves problems related to no sound, low volume, or noise.
Troubleshoots issues where the TV will not turn on or display an image.
To Next Page