Samsung UE22C4010PW User Manual

31
English
04 Advanced Features
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet+ Menu Description
View TV Changes Anynet+ mode to TV broadcast mode.
Device List Shows the Anynet+ device list.
(device_name) MENU Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of
the DVD recorder will appear.
(device_name) INFO Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the
play menu of the DVD recorder will appear.
Recording: (*recorder) Starts recording immediately using the recorder. (This is only available for devices that
support the recording function.)
Stop Recording: (*recorder) Stops recording.
Receiver Sound is played through the receiver.
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is
connected, it will be represented as (*device_name).
 Setting Up Anynet+
■ Setup
Anynet+ (HDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.
✎ When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.
Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off.
✎ The active source on the TV must be set to TV to use the Anynet+ function.
✎ Even if an external device is still recording, it may turn off.
 Switching between Anynet+ Devices
1. Anynet+ devices connected to the TV are listed.
✎ If you cannot find a device you want, press the Red button to refresh the list.
2. Select a device and press the ENTER
 button. You can switch to the selected device.
✎ Only when you set Anynet+ (HDMI-CEC) to On in the Application menu, the Device List menu appears.
x
Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching
operation.
x
If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function.
Make sure to switch to an Anynet+ device by using the Device List.
[400019-Euro]BN68-02655E-00Eng.indb 31 2010-03-02 오전 9:38:03

Samsung UE22C4010PW Specifications

General

Display diagonal	22 \
Display resolution	1366 x 768 pixels
Native refresh rate	60 Hz
Product color	White
Audio system	Dolby Digital Plus, Dolby Pulse
RMS rated power	5 W
Built-in subwoofer	No
Number of speakers	2
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	0
Consumer Electronics Control (CEC)	Anynet+
Power requirements	220 - 240V, 50 / 60 Hz
Package weight	5700 g
Power consumption (standby)	0.3 W
Power consumption (typical)	50 W

Weight and Dimensions

Depth (with stand)	189.5 mm
Height (with stand)	411.1 mm
Weight (with stand)	4100 g
Depth (without stand)	29.9 mm
Width (without stand)	545.2 mm
Height (without stand)	359 mm
Weight (without stand)	3700 g