Samsung UE22C4010PW User Manual

32
English
Advanced Features
 Recording
You can make a recording of a TV Programme using a Samsung recorder.
1. Select Recording.
✎ When there are more than two recording devices
x
When multiple recording devices are connected, the recording devices are listed. Select one recording device in
the Device List.
✎ When the recording device is not displayed, select Device List and press the Red button to search devices.
2. Press the EXIT button to exit.
✎ You can record the source streams by selecting Recording: (device_name).
✎ Pressing the  (REC) button will record whatever you are currently watching. If you are watching video from
another device, the video from the device is recorded.
✎ Before recording, check whether the antenna jack is properly connected to the recording device. To properly
connect an antenna to a recording device, refer to the recording device’s users manual.
 Listening through a Receiver
You can listen to sound through a receiver (i.e Home Theatre) instead of the TV Speaker.
1. Select Receiver and set to On.
2. Press the EXIT button to exit.
✎ If your receiver supports audio only, it may not appear in the device list.
✎ The receiver will work when you have properly connected the optical in jack of the receiver to the
DIGITAL AUDIO OUT (OPTICAL) jack of the TV.
✎ When the receiver (i.e Home Theatre) is set to On, you can hear sound output from the TV’s Optical jack. When the
TV is displaying a DTV (aerial) signal, the TV will send out 5.1 channel sound to the receiver. When the source is a
digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from
the receiver.
✎ NOTE
x
You can only control Anynet+ devices using the TV remote control, not the buttons on the TV.
x
The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.
x
The Anynet+ functions do not operate with other manufacturers’ products.
[400019-Euro]BN68-02655E-00Eng.indb 32 2010-03-02 오전 9:38:03

Samsung UE22C4010PW Specifications

General

Display diagonal	22 \
Display resolution	1366 x 768 pixels
Native refresh rate	60 Hz
Product color	White
Audio system	Dolby Digital Plus, Dolby Pulse
RMS rated power	5 W
Built-in subwoofer	No
Number of speakers	2
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	0
Consumer Electronics Control (CEC)	Anynet+
Power requirements	220 - 240V, 50 / 60 Hz
Package weight	5700 g
Power consumption (standby)	0.3 W
Power consumption (typical)	50 W

Weight and Dimensions

Depth (with stand)	189.5 mm
Height (with stand)	411.1 mm
Weight (with stand)	4100 g
Depth (without stand)	29.9 mm
Width (without stand)	545.2 mm
Height (without stand)	359 mm
Weight (without stand)	3700 g