Samsung UE40F8000SL - Page 31

2-22
2. Product specications
Installer Mode• : Sets limits to the scope of movement of satellite aerial or reset the position. Generally, installation
guide uses this function.
Limit Position: Selects the direction of the positioner Limit. -
Aerial Position: Adjusts and stores the aerial position for the selected satellite. -
Store Current Position: Stores the current position as the selected positioner Limit. -
Go to zero: Moves the aerial to the reference position. -
Reset positioner limit: Allows the aerial to rotate over the full arc. -
Reset All Settings: All satellite settings will be reset to the initial values. •
Scanning for Satellite Channels 
Screen Menu > Broadcasting > Channel Settings > Manual Tuning
Press Scan after setting the items below.
Transponder•
Selects the transponder.
Scan Mode•
Selects either free or all channels to store.
Network Search•
Enable / Disable network search.
Signal Quality•
Display the current status of broadcasting signal.
Network Name•
This displays the name of the network that is found.
NOTE
Information on a satellite and its transponder is subject to change depending on the broadcasting conditions.•
When setting is completed, move to Search. Channel scan is started.•