3-1
3. Disassembly and Reassemble
3. Disassembly and Reassembly
This section of the service manual describes the disassembly and reassembly procedures for the LED TV.
WARNING
This LED TV contains electrostatically sensitive devices. Use caution when handling these components.
3-1. Disassembly and Reassembly
CAUTION
Disconnect the LED TV from the power source before disassembly.1.
Follow these directions carefully; never use metal instruments to pry apart the cabinet.2.
If there is no additional coment, it is same for all inches.3.
Description Picture Description Screws
1
Place TV face down on cushioned table.
2
Remove 4 screws from the ASSY
STAND P-BAS.
Torque :
7~ 8Kgf.cm.
6003-001494
3
Remove ASSY STAND P-BASE.
CAUTION
Becareful when you remove ASSY
STAND P-BASE, It could be sharp as
a metal parts.
To Next Page
Loading...
