Samsung UN43TU7000F - Factory Mode

4-8. Factory Mode
 Setting TV into Factory Mode
AA81-00243A
(Service Remotes)
Factory Remote
1. Power TV ON.
2. Select TV Source.
3. Info → Factory .
4. Use MENU for return.
AA81-00243B
(Recommended)
Samsung IR Remote
1. TV Power Standby.
2. Press as follows.
• Remote Button
NTSC MUTE 1 8 2 POWER
PAL INFO MENU MUTE POWER
 Important Items
• Option (must set Option Bytes when replacing Main Board.)
• Option → Factory Reset (returns TV to out of box condition.)
– Must perform when replacing Main Board or Full One Connect)
• SVC→Info→ER Count (Important to check for errors.)
– Resets to 0 with Factory Reset.
9 Check before resetting TV
• SVC→Test Patterns (Use to check / troubleshoot) videos errors.
• Control→EDID (Use to Reset HDMI Operational Errors)
Setting Option Bytes
1. Enter Factory Mode with Service Remote (only).
2. Check Option Byte Table located on GSPN (Fast Track or
Tips).
3. Select Option .
4. Select each item to change.
5. Can Use new Writing Type to enter model.
(if entered wrong it will not change.)
6. Soft power TV Off to load.
Factory Reset
Type 50D6AUAGT
Writing Type
Local Set US
SW Model UTU7000
Front Color UTU7000K-U50TK1
Writing Front Color
Model Code UN50TU7000FXZA
TUNER -
Ch Table NONE
4-19
4. Troubleshooting