3-1
3. Disassembly and Reassemble
3. Disassembly and Reassembly
This section of the service manual describes the disassembly and reassembly procedures for the LED TV.
WARNING
This LED TV contains electrostatically sensitive devices. Use caution when handling these components.
3-1. Disassembly and Reassembly
CAUTION
Disconnect the LED TV from the power source before disassembly.1.
Follow these directions carefully; never use metal instruments to pry apart the cabinet.2.
If there is no additional coment, it is same for all inches.3.
3-1-1. TV Disassembly
Description Picture Description Screws
1
Place TV face down on cushioned table.
2
Remove 4 screws from the ASSY
STAND P-BAS.
Torque :
7~ 8Kgf.cm.
6003-001494
(48"/55")
6003-001334
(65")
3
Remove the screws of ASSY COVER
P-REAR.
48": 16 EA•
55": 19 EA•
65": 21 EA•
Torque :
7~ 8Kgf.cm.
6002-001619
To Next Page
Loading...
