4-2-4. 3D Picture
Select the 1. 3D Picture Test from the Self Diagnosis menu.
Press and hold the power button on the glasses to pair them to the TV.2.
If the operation is successful, the test image will appear in 3D and the glasses will automatically turn on.3.
<Glasses Successfully Paired>
If the operation 4. fails, verify the battery is inserted correctly and perform test again.
Also verify the 5. Bluetooth address is displayed correctly on the screen below.
BT Address
<Pairing Failed>
Check the 3-D picture for correct operation; If noisy it may be a defective Main PCB or T-CON Board.6.
To Next Page
Loading...
