4-3-2. Entering Factory Mode
To enter ‘Service Mode’ Press the remote -control keys in this sequence :
If you do not have Factory remote control•
Power OFF MUTE 182 Power On
If you have Factory remote control•
INFO Factory
Some items are not available without a factory remote.•
Option
Control
Debug
SVC
ADC/WB
Advanced
T-HKMAKUC-XXXX.XX
T-HKMAKUS-XXXX
rel-hawkall-atsc-mp-hawk-m-uhd_
XXXXXXXX.X (Release)
Main SPI version : 0000XXXX
OCM SPI version : 0000XXXX
BT Version : BLUETOOTH-VER-00XX
E-MANUAL : HMUATSCJ-X.XXX
CAMERA : ****
BLASTER VERSION : Not Support
E-POP Version : X.XX.X
EDID SUCCESS
HDCP SUCCESS
CALIB : AV / COMP / PC / HDMI /
OPTION : 55A1UU8QJ,US,8500,NONE
DTCP Not Support
FRC[HAWK-UFT] Panel[SDC-120Hz]
FW[62XX] Data[03XX] LD[BAR-1X8][XX]
TCON[HawkUFT]Flash[J55A1U0C2]
Demura[XXXX][-]
Model : UNXXJS8500
Wired MAC SUCCESS
Wireless MAC SUCCESS
WIFI Version : BRCM43569_X.XXX.XX_
XXXXXX_KAS
CO Nf/ W/ M/ D/ HX PO AO O S/ N/ RO SC/ Six
Factory Data Ver : XXX / EERC Version : XX
CPLD/LD : N/A
SmartControl : AXXXXXXX
Date of purchase : --/--/----
Main SW Version
Sub Version (Main, Jak)
Bluetooth Version
E-Manual Version
FRC SW Version
Condition of Wired Mac
TCON Version
Condition of Wireless Mac
To Next Page
Loading...
