Connecting Anynet + Devices
What is Anynet+?
Anynet + is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV's
remote. TheAnynet+ system can be used onlywith Samsung devices that have the Anynet + feature. To be sure your Samsung
device has this feature, check if there is anAnynet + logo on it.
To connect to a TV
TV
Anynet+ Device 1 Anynet + Device 2 Anynet+ Device 3 Anynet+ Device4
Cable y HDMI 1.3 Ca DMI1.3 Ca , HDMI 1.3Cable
1. Connect the HDMI iN (1(DVm),2, 3 or 4)jack on the TV and the HDMI OUTjack of the corresponding Anynet + device using an
HDMI cable.
To connect to Home Theater
TV HomeTheater Anynet + Device 1
oi
Anynet+ Device 2 Anynet+ Device 3 Anynet+ Device 4
1,
2,
Connect the HDMI iN (1(DVm),2, 3 or 4)jack on the TV and the HDMI OUTjack of the corresponding Anynet + device using an
HDMI cable.
Connect the HDMI INjack of the home theater and the HDMI OUT jack ofthe corresponding Anynet+ device using an HDMI
cable.
Connect the Optical cable between the DiGiTAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input on
the Home Theater.
When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from the
Home Theater's Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the
DiGiTAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (ie Anynet Device 1 or 2) directly to the Amplifier or
Home Theater, not the TV.
Connect only one Home Theater.
You can connect anAnynet+ device using the HDMI 1.3 cable. Some HDMI cables may not support Anynet+functions.
Anynet+ works when the AV device supporting Anynet + is in the Standby or On status.
Anynet+ supports up to 12AV devices in total. Note that you can connect up to 3 devices of the same type.
To Next Page
Loading...
