Securing the TV to a Wall or Cabinet
Caution: Pulling, pushing,o[ climbing on the Ty may cause the TV to fa!!: in particula[, ensure your children do
not hang over or destabilize the iM; doing so may cause the TV to tip over, causing serious injuries or death,
Follow at! safety precautions providedon the included Safety Flyer_For added stability,install the anti-fall device
for safety purposes, as follows,
Components (Depending on the model):
TV-Holder Screw O (MSxL19)
To prevent the TV from falling:
1, Remove the screw from the top right of the rear cover of the TV. Fasten the TV-Holder to the TV by fastening Screw O (for
fixing the TV) into the screw hole.
Make sure to only use the supplied screws.
cabinei'_
2,
Firmly fasten the screws to the wall or cabinet where the TV is to be installed. Tie the TV-Holder attached to the TV and the
screws fastened onthe wall or cabinet so that the TV isfixed.
Purchase the screws to be used on the wall or cabinet separately.
Install the TV close to the wall so that it does not fall.
When attaching the TV to the wall, tie the cord level with the ground or slanted downwards for safety purposes.
Confirm that the cord or link does not come loose.
Before moving the TV, separate the connected cord first.
3, Verify all connections are properly secured. Periodically check connections for any sign of fatigue or failure. Ifyou have any
doubt about the security ofyour connections, contact a professional installer.
To Next Page
Loading...
