Samsung UN55ES7100 - VESA Wall Mount Kit Specifications; VESA Wall Mount Kit Notes and Specifications

VESA Wall
Mount Kit Notes and Specifications
~
Install your
wall
mount on a
solid wall perpendicular
to the
floor.
Before attaching the wall
mount to
surfaces other than
plaster
board, please contact your nearest
dealer
for
additional
information.
If
you
install the
TV
on a
ceiling
or
slanted wall, it may
fall
and
result
in
severe personal
injury.
~NOTE
•
Standard dimensions for
wall
mount kits are shown
in
the
table below.
• Samsung wall
mount kits contain a
detailed installation manual
and
all
parts necessary for
assembly
are provided.
•
Do not use screws that
do
not
comply
with the
VESA
standard screw specifications.
•
Do not use screws that are
longer than the standard
length
or
do
not
comply
with the VESA
standard screw specifications.
Screws
that are
too
long
may cause damage
to
the inside of the TV
set.
•
For
wall
mounts that
do
not
comply with the
VESA
standard screw specifications, the
length
of
the
screws may differ depending on the
wall
mount specifications.
•
Do not fasten the screws too
firmly. This may damage the product
or
cause the product
to
fall,
leading
to
personal
injury.
Samsung
is not
liable
for these kinds
of
accidents.
• Samsung
is
not
liable
for product damage or
personal
injury when a
non-VESA
or
non-specified
wall
mount
is
used or the consumer
fails
to
follow
the product
installation instructions.
•
Do not mount the TV at more than a 15 degree
tilt.
• Always have
two
people
mount the TV on a
wall.
26
100
X
10
0
M4
L
ED-TV
32
- 40
200
X
200
M6
4
46
-
60
400
X
400
MS
~
Remove the screws
in
the mounting
holes
before you install
the wall
mount.
Do not
in
stall
your
Wa
ll
Mount Kit
while
your TV is turned on. It
may
result
in
personal
injury due
to
electric
shock.
Installing a
Wall
Mount from Another Manufacturer
To
in
sta
ll
a
wall-mount
from another ma
nu
facture
r,
use the
Holder-
Ring.