What to check if water is not supplied to Samsung Washer?
If water is not being supplied to your Samsung Washer, make sure the water taps are open and the water hoses are not clogged. Ensure the water taps are not frozen and that the washing machine is operating with sufficient water pressure. Also, check that the cold and hot water taps are properly connected and clean the mesh filter as it may be clogged.
Why is my laundry load still wet after my Samsung WA45T3400 cycle?
If your laundry load is still wet at the end of the cycle, use the High spin speed. Also, use high-efficiency (HE) detergent to reduce oversudsing. Small loads (one or two items) may become unbalanced and not spin completely.
Why does water drain out of my Samsung WA45T3400 immediately?
If water drains out of your Samsung Washer immediately, make sure the drain hose is not clogged and is hung over the drain hose hook. Lift the end of the drain hose to prevent water from draining. Fill the spin basket halfway with water, and try spinning again. Ensure the drain hose is installed correctly.
Why is my Samsung WA45T3400 Washer filling with the wrong temperature water?
If your Samsung Washer is filling with the wrong temperature water, fully open both water taps and ensure the temperature selection is correct. Make sure the hoses are connected to the correct water taps. Flush the water lines and disconnect the hoses to clean the screens. The water temperature may change as the automatic temperature control checks incoming water temperature. You may also notice just hot or cold water going through the dispenser when cold or warm temperatures are selected.
General| Type | Top Load Washer |
|---|---|
| Capacity | 4.5 cu. ft. |
| Energy Star Certified | Yes |
| Wash Cycles | 8 |
| Spin Speed | 700 RPM |
| Weight | 130 lbs |
| Color | White |
| Control Type | Electronic |
| Number of Wash Cycles | 8 |
| Steam Function | No |
| Smart Features | No |
| Voltage | 120 V |
Lists crucial precautions for safe operation, installation, and usage of the washer.
Covers critical warnings and cautions for installation and general operation, including electrical safety.
Covers connecting hoses, leveling, powering, testing, and calibration procedures.
Guides on loading laundry correctly and initiating a wash cycle.
Lists typical issues and step-by-step actions to resolve them.
To Next Page