Samsung WA48J7700A series - Information codes

54 English
Troubleshooting
Troubleshooting
Problem Action
Has odours.
• Excessive suds collect in recesses and can cause foul odours.
• Run cleansing cycles to sanitize periodically.
• Dry the washing machine interior after a cycle has nished.
If a problem persists, contact a local Samsung service center.
Information codes
The washer may display information codes to help you understand what is occurring with
your washer better.
No Code Action
1 1C
The Water Level sensor is not working properly.
•CheckWaterLevelSensorwireharness.
•Iftheinformationcoderemains,contactacustomerservice
centre.
NOTE
When the washer displays “1C”, the washer do draining for 3
minutes. During this time, the Power button is inoperative.
2 3C
Check the motor for operation.
•Tryrestartingthecycle.
•Iftheproblemcontinues,callforservice.
3 4C
Water is not supplied.
•Makesurethewatertapsareopen.
•Makesurethewaterhosesarenotclogged.
•Makesurethewatertapsarenotfrozen.
•Makesurethewashingmachineisoperatingwithsufcient
water pressure.
•Makesurethatthecoldwatertapandthehotwatertap
are properly connected.
•Cleanthemeshlterasitmaybeclogged.
NOTE
When the washer displays “4C”, the washer do draining for 3
minutes. During this time, the Power button is inoperative.
WA7700J_WA48J7700AW-03520D-01_EN.indd 54 2015/4/16 9:38:41