English
Installation
English20
5. Open the water taps, and check for leaks.
STEP 3 Connect the drain hose
To a Laundry Tub or Drain Pipe
1. Check the height (A) of your drain system and make
sure the minimum and maximum heights shown
below are met.
Minimum 39 in. (99 cm)
Maximum 96 in. (245 cm)
NOTE
• Make sure to measure the height from the floor
where the washer is placed.
• Draining efficiency may be reduced if the drain
system is at the maximum height.
• To prevent the washer from siphoning water, do not
use a drain system below the minimum height.
2. Attach the drain hose to the plastic hose guide (B).
Untitled-1 20 2022-05-13 11:31:44
To Next Page
Loading...
