To Next PageTo Next PageWhat does Foaming Detected mean on my Samsung WA5451AN Washer?
If your Samsung Washer displays 'Foaming Detected', it means the washer has detected too much foam. This is a normal operation to prevent non-sensing faults.
How to fix Communication Error on Samsung WA5451AN Washer?
A Communication Error on your Samsung Washer means the signals between the sub and main PBAs are not being sensed. To resolve this, carefully check the connector connections between the sub and main PBAs.
How to fix MEMS error on Samsung WA5451AN?
A MEMS error on your Samsung Washer indicates that the output from the MEMS sensor is over 4.5V or under 0.5V. Check the MEMS sensor.
Why does my Samsung WA5451AN show a communication error?
If your Samsung Washer displays a communication error, the signals between the sub and main PBAs are not being sensed. Check for incorrect or loose connections to resolve this issue.
What to do if my Samsung WA5451AN Washer shows Switch Error (Main Relay Error)?
If your Samsung Washer displays a Switch Error (Main Relay Error), it means the Power button is continually pressed. Release the Power button.
How to resolve a temperature sensor error on a Samsung Washer?
If your Samsung Washer displays a temperature sensor error, there may be an issue with the washing heater in the tub. Resolve the contact error or temperature sensor fault.
Explains icons and signs used in the manual to denote hazards and precautions.
Crucial warnings regarding electrical safety, grounding, and proper installation procedures.
Cautions related to appliance placement, power plug accessibility, and floor stability.
Warnings about flooding, strange noises, smoke, gas leaks, flammable substances, and opening the door.
Guidelines for electrical, grounding, and water supply requirements for washer installation.
Provides detailed measurements for washer installation, including spacing and clearances.
Instructions for installers regarding location selection and professional installation.
Criteria for choosing an appropriate installation location for the washer.
Detailed steps for connecting the water supply hoses and drain.
Instructions on connecting hot and cold water supply hoses, including checks for leaks.
Methods for connecting the drain hose to a standpipe, laundry tub, or wash basin.
Procedure for ensuring the washer is level using the tub and leveling feet.
Guidance on connecting the power cord to a grounded electrical outlet.
Instructions for running a test cycle to verify proper installation and operation.
Guidelines for loading clothes into the washer, avoiding overloading, and adding forgotten items.
Introduces the control panel, display, and cycle selection options.
Details the available wash cycles and their recommended uses for different fabric types.
Step-by-step guide on selecting cycles and options for washing clothes.
General