The pen is magnetic. Keep it by attaching to the marked location.
Press the button to turn on the product and press and hold the
button to turn off the product.
The power indicator is off when the product is on.
The power indicator is on when the product is off.
In writing mode, shortly press the Power button to switch to the
screen saver mode.
In case the PIP screen is in Full Screen mode, press the Power button
to display the adjustment menu. Press again to hide.
The light sensor is used to detect ambient light for the Brightness
Optimization function.
You can turn on or off the Brightness Optimization function at
[MenuSettings][SystemAdvanced SettingsBrightness
Optimization]
You can connect a device using a USB-C cable.
USB-C connection allows video output and touch-based control of
the device.
You must use a USB-C cable that supports video transmission. Use
a cable that supports DP ALT Mode (Video transmission).
Use a USB-C cable that is 1 m or shorter in length.
Charging is also supported up to 65 W. Charging with USB-C
cable is only available when the product is on.
An HDMI port for displaying input from an external source.
Allows touch-based control of the PC screen connected through the
HDMI port.
Use the supplied USB cable to connect between the TOUCH port on
the rear of the product and the PC.
Connect to a USB memory device.