To Next PageTo Next PageHow to troubleshoot a Samsung Washer that won't work?
If your Samsung Washer isn't working, check a few things: * Ensure the water tap is open. * Make sure the washer is properly plugged into a working power outlet. * Verify that there is no power outage. * Confirm that there is enough water supply.
What to do if Samsung WA70F5G4 water is overflowed?
If the Samsung Washer overflows, restart the cycle after spinning. If the error persists, it is recommended to call a qualified agency for assistance.
What to do for water leakage error in Samsung WA70F5G4 Washer?
If you are experiencing a water leakage error with your Samsung Washer, it is recommended to call the service center.
How to clear a Child Lock error on a Samsung WA70F5G4?
To clear the “CL” display on your Samsung Washer, ensure draining is complete, then close the washer door, turn the power off, and then turn it back on.
General| Model | WA70F5G4 |
|---|---|
| Type | Top Load |
| Capacity | 7.0 kg |
| Energy Rating | 5 Star |
| Spin Speed | 700 RPM |
| Water Level | 5 Levels |
| Body Color | White |
| Color | White |
Essential warnings to prevent danger and damage during use.
Precautions regarding water temperature, plastic parts, and electrical hazards.
Warnings about damaged cords, moisture, and proper usage.
Advice on avoiding hazards like fire, explosion, and improper operation.
Advice on moisture, unplugging, cleaning agents, and outlets.
Specific warnings related to electrical components and fire hazards.
Step-by-step guide to enable and disable the Child Lock feature.
How Child Lock affects operation and safety precautions.
Steps to diagnose the washing machine using a smartphone.
Instructions on how to ensure the machine is properly leveled.
Detailed steps for attaching the water supply hose to the tap.
Continuing the process of connecting the water supply hose.
Guidance on correctly installing the drain hose for pump-drained models.
Steps to run calibration mode for accurate weight detection.
Common issues and checks when the machine does not start.
Troubleshooting steps for drainage problems.
Checks for issues related to water supply.
Reasons for spinning issues and checks.
Checks for power supply problems and initial startup issues.
