26 English
Operations
Operations
Control panel
01
02
03 04 05 06 07
10
09 11
08
01 Display
Displays the remaining time of a cycle, or the information code when
a problem occurs.
Child lock
Child Lock is used to prevent children from accidents such as
drowning in the tub, and remains active after the machine restarts. To
cancel the Child Lock, deactivate it.
Tub Clean
Use to keep the tub clean. This indicator lights up automatically on a
regular basis. When the indicator turns on, run the Tub Clean cycle.
Delay End
You can set to nish a cycle at a specic time. This indicator turns on
when pressing Delay End and turns off when the set cycle starts.
Status
After selecting a cycle, press Delay End or Start/Pause. This indicator
turns on and displays the remaining time of the current cycle.
02 Delay End
Press this button to nish the wash at a specied time.
To cancel the Delay End settings, simply turn off the washing
machine.
You can set the Delay End time up to 19 hours.
03 Water Level
The water level is adjusted according to the cycle. However, you can
change the level manually.
04 Wash
Press to start washing, or adjust the wash time between 6 and 30
minutes.
05 Rinse Press to run the rinse cycle, or change the rinse count up to 5.
WA6700JS(PREMIUM)-03515T_EN (Australia)_150429.indd 26 2015-04-29 8:31:15
To Next Page
Loading...
