English 31
Maintenance
Maintenance
Cleaning
Keep the washing machine clean to prevent deteriorated performance and to preserve its life
cycle.
Tub Clean reminder
• The indicator reminds you of cleaning the tub when necessary. If you happen to see
the indicator blinking after washing is complete, remove the laundry and run the Tub
Clean cycle.
• You can ignore this reminder and continue to run cycles normally because this is
not a system failure. However, the reminder remains active for 6 consecutive cycles
immediately after each cycle is complete.
• The reminder is activated once every 1-3 months, depending on the cycle count.
• To keep the tub clean, it is recommended to run Tub Clean on a regular basis.
Built-in sink
1. Open the door, and use a cloth or sponge to clean the Built-in sink.
2. Press Water Jet to supply water to the board. Use this water to rinse the board.
Lint lter
1. Press down the upper area of the lter
case to remove.
2. Unlock the cover, and clean the lter
with running water and a brush.
3. When cleaning is complete, close the
cover and reinsert the lter case to the
original position. You will hear a clicking
sound when the lter case ts in.
WA6700JS(PREMIUM)-03515T_EN (Australia)_150429.indd 31 2015-04-29 8:31:16
To Next Page
Loading...
