Shooting options
56
Changing the camera’s focus
Focusing on a selected area
You can focus on an area that you have selected.
1
In Shooting mode, press [ ].
2
Select Focus Area → Selection AF.
3
Press [ ], and then press [ / / / ] to move the
frame to a desired area.
Move Set
4
Press [ ].
5
Press [Shutter] to capture the photo.
•
Press [ ] to change the focus area.
If you use this function, you cannot set Face Detection options,
Timer options, and Intelli zoom.
2
Select an option.
Icon Description
Normal (AF): Focus on a subject farther than
31 in. (80 cm) away. Farther than 138 in. (350 cm) away
when you use the zoom.
Macro: Focus on a subject that is 4-31 in. (10-80 cm)
from the camera. 79-138 in. (200-350 cm) when you
use the zoom.
Auto Macro:
•
Focus on a subject farther than 4 in. (10 cm) away.
Farther than 79 in. (200 cm) away when you use the
zoom.
•
It is set automatically in some shooting modes.
Super Macro: Focus on a subject that is 0.4-4 in. (1-10
cm) from the camera.
Available options may differ depending on the shooting conditions.
•
In some modes, you can also set the focus option by pressing
[ ], and then selecting Focus.
•
The zoom is not available with the Super Macro option.
To Next Page
Loading...
