Samsung WB100 - Connectivity

Settings 94
Settings menu
* Default
Item Description
Display
Brightness
Adjust the brightness of the screen.
(Auto*, Dark, Normal, Bright)
Normal is fixed in Playback mode even if you have
selected Auto.
Quick View
Set whether or not to review a captured image
before returning to the Shooting mode. (Off, On*)
Auto Display Off
If you perform no operations for 30 seconds, the
camera automatically switches to Auto Display Off
mode. (Off*, On)
• In Auto Display Off mode, press any button
other than [POWER] to resume using the
camera.
• Even if you do not set the Auto Display Off
mode, the screen will dim 30 seconds after the
last operation to save power.
Connectivity
* Default
Item Description
Video Out
Set the video signal output for your region.
• NTSC: USA, Canada, Japan, Korea, Taiwan,
Mexico
• PAL (supports only BDGHI): Australia, Austria,
Belgium, China, Denmark, England, Finland,
France, Germany, Italy, Kuwait, Malaysia,
Netherlands, New Zealand, Norway, Singapore,
Spain, Sweden, Switzerland, Thailand
Anynet+
(HDMI-CEC)
Turn on to control the camera with a TV remote
control when you connect it to an HDTV that
supports the Anynet+(CEC) profile.
• Off: View files without using an HDTV remote
control.
• On*: Control the camera with an HDTV remote
control.