Samsung WB100 - Disconnecting the Camera (for Windows XP); Disconnecting the Camera; (For Windows XP)

Playback/Editing 89
Transferring files to your Windows computer
Disconnecting the camera (for Windows XP)
With Windows Vista and Windows 7, the methods for
disconnecting the camera are similar.
1
Verify that the status lamp is not blinking.
• The status lamp blinks when transferring files. Wait until it
stops.
2
Click on the tool bar at the bottom right of
your computer screen.
3
Click the pop-up message.
4
Click the message box that indicates the camera
can be removed safely.
5
Remove the USB cable.
The camera may not disconnect safely while Intelli-studio is running. End the
program before disconnecting the camera.
5
Turn on the camera.
• The computer recognizes the camera automatically.
6
On your computer, select My Computer → Removable
Disk → DCIM → 100PHOTO.
7
Drag or save files to your computer.