Settings
106
Settings menu
Item Description
Quick View
Set the duration for reviewing a captured image
before returning to the Shooting mode.
(Off, 0.5 sec*, 1 sec, 3 sec)
Power Save
If you perform no operations for 30 seconds, the
camera automatically switches to Power save
mode. (Off*, On)
•
In Power save mode, press any button other
than [POWER] to resume using the camera.
•
Even if you do not set the Power save mode,
the screen will dim 30 seconds after the last
operation to save power.
Connectivity
* Default
Item Description
Video Out
Set the video signal output for your region.
•
NTSC*: USA, Canada, Japan, Korea, Taiwan,
Mexico
•
PAL (supports only BDGHI): Australia, Austria,
Belgium, China, Denmark, England, Finland,
Germany, Italy, Kuwait, Malaysia, Netherlands,
New Zealand, Norway, Singapore, Spain,
Sweden, Switzerland, Thailand
Anynet+ (HDMI-
CEC)
Set whether or not to control the camera with a TV
remote control when you connect it to an HDTV
that supports the Anynet+(CEC) profile.
•
Off: View files without using an HDTV remote
control.
•
On*: Control the camera with an HDTV remote
control.
* Default
To Next Page
Loading...
