Samsung WD0804W8E - Page 19

setting up your washing machine _19
01SETTINGUP
6. Turn on the water supply and ensure that no water leaks
fromthewatervalve,taporadaptor.Ifthereisawater
leaks, repeat the previous steps.
Donotuseyourwashingmachineifthereisawaterleak.
This may cause electric shock or injury.
• Ifthewatertaphasascrewtypetap,connectthewater
supply hose to the tap as shown.
Usethemostconventionaltypeoftapforthewatersupply.Incasethetapissquareortoo
big, remove the spacing ring before inserting the tap into the adaptor.
Connecting the Aqua Hose (Selected models)
The Aqua Hose was invented for perfect leakage protection.
Itisattachedtothewatersupplyhoseandautomaticallycuts
offthewaterowifthehoseisdamaged.Italsodisplaysa
warning indicator.
• Connectthewatersupplyhosetothetapasshown.
✗
✗
WARNING
WD0804W8-02927U_EN(XEU)_removePF.indd 19 2011-7-9 11:58:51